Canon iPF750 series Service Manual

Also see for iPF750 series: Service manual Service manual

Contents

Chapter 88-48.3 Error Table8.3.1 Errors 0023-3206iPF750 / iPF755* Codes represent the numbers that are displayed in DISPLAY in service mode.If the same message is displayed when the printer is turned off, then back on, take action as recommended in the Action column.T-8-3Display massage Code* Condition detected ActionPHead needs cleaning.Press Online to clearerror.03800500-280C Printhead found to have many non-dischargingnozzles during a non-discharging inspection (printingpaused)Clean the printhead. Identify the nozzles in a nozzle checkpattern. Replace the printhead.Paper size not detected.Lift the release lever andreload the paper.03010000-200C Unable to detect the leading end of paper Check the leading end of paper. Reload the paper.Leading edge detectionerror.Lift the release lever andalign leading edge withorange line.03010000-200D Unable to detect the trailing end of cut sheet Check the sheet length. Check to see if paper has notjammed.Paper size not detected.Lift the release lever andreload the paper.03010000-2017 Paper (right) edge detection error Check the right edge of paper. Check the paper type.Paper size not detected.Lift the release lever andreload the paper.03010000-2018 Paper (left) edge detection error Check the left edge of paper. Check the paper type.Cannot adjust printhead.Press Online to clear theerror and readjustprinthead.03863000-2820 Printhead registration unadjustable Check the paper on which a pattern is printed for smears.Check the environment for interferences from outsidelight.Clean the printhead.Cannot adjust printhead.Press Online to clear theerror and readjustprinthead.03863000-2821 LF unadjustable Check the paper on which a pattern is printed for smears.Check the environment for interferences from outsidelight.Clean the printhead.Cannot print as specified.Lift the release lever andreplace paper with A4/LTR (vertical) or larger.03010000-2E1F Undersized paper loaded for internal printing (A4 orlarger)Replace with A4/Letter or any larger-sized paper.Cannot print as specified.Lift the release lever andreplace paper with A3/Ledger (vertical) orlarger.03010000-2E1F Undersized paper loaded for internal printing (A3 orlarger)Replace with A3/11"x17" or any larger-sized paper.Cannot print as specified.Lift the release lever andreplace roll with 10 in.wide or larger roll.03010000-2E1F Undersized paper loaded for internal printing (rollmedia)Replace with roll media at least 10 inches in width.Cannot detect paprRemove paper and pressLoad/Eject.03010000-2E25 Paper jam while feeding/ejecting/printing Remove the paper jam and reload the paper.Cannot feed paperLift the release lever andreload paper.03010000-2E27 Paper jam during feeding/printing/ejection Reload the paper.This paper cannot beused.Check supported papersizes.03010000-200E Undersized paper (cut sheets/roll media) Replace with larger-sized paper.This paper cannot beused.Check supported papersizes.03010000-200F Oversized paper (cut sheets/roll media) Replace with smaller-sized paper.Use another paper.Press Online to clear theerror.03010000-2F33 Unadjustable because of transparent media Replace with adjustable media.Paper loaded askew.Lift the release lever.03016000-2010 Skew Correct the skew in the paper and reload it.Paper size not detected.Reload paper.03010000-200A Unable to detect the paper width (Paper loaded at animproper position)Reload the paperPaper jam.Press Load/Eject andreload the paper.03010000-2E27 Paper jam during feeding/printing/ejection Reload the paper