Canon iPF750 series Service Manual

Also see for iPF750 series: Service manual Service manual

Contents

Chapter 11-33[Set./Adj. Menu]T-1-16Setting Item Description/Instructions[Test Print] [Nozzle Check] Print a nozzle check pattern.[Status Print] Print the printer information.[Interface Print] Print the interface settings.[GL2 Set Print] Print the GL2 settings.[Paper Details] Prints the paper settings set with [Paper Details].[Print Job Log] Print print job information such as paper type, size, and ink consumption. Ink consumption isthe approximate amount of ink used to print one sheet.[Menu Map] Print the menu list.[Color Palette] Print the GL2 color list.[AdjustPrinter][Head Posi.Adj.][Auto(Standard)] Print and read a test pattern for the automatic adjustment of Printhead alignment relative to theprinting direction.[Auto(Advanced)] Print and read a test pattern for the automatic adjustment of Printhead alignment relative to thenozzle and printing direction.[Manual] Print a test pattern for adjustment of Printhead alignment relative to the printing direction. Enterthe adjustment value manually based on the resulting pattern.[Head Inc. Adj.] Print an adjustment pattern for adjusting the inclination of the printhead.[Feed Priority] [Adj. Priority] [Automatic] Set the priority feed precision. Normally select [Automatic]. Select [Print Quality] to print athigh quality. Select [Print Quality] to reduce horizontal streaks. Select [Print Length] toaccurately control the feed amount. However, selecting [Print Length] may cause colors tobecome slightly uneven in the carriage scan direction.[Print Quality][Print Length][Adj. Quality] [Auto(GenuinePpr)]Set when using paper described in the paper reference guide.A pattern to adjust the paper feed amount is printed, and the feed amount is automaticallyadjusted from the printed result.[Auto(OtherPaper)]Set when using paper not described in the paper reference guide.A pattern to adjust the paper feed amount is printed, and the feed amount is automaticallyadjusted from the printed result.This takes longer than [Auto (GenuinePpr)] to print and consumes more ink.[Manual] Select for paper that cannot be adjusted by [Auto(GenuinePpr)] or [Auto(OtherPaper)], such ashighly transparent paper.Print a pattern to adjust the paper feed amount according to the type of paper.[AdjustLength][AdjustmentPrint]-[A:High]/[B:Standard/Draft]Print a test pattern for adjustment relative to paper stretching or shrinkage, after which you canenter the amount of adjustment.[ChangeSettings]-[A:High]/[B:Standard/Draft]Displayed when [Print Length] is selected as [Adj. Priority] for [Feed Priority].Adjust the expansion rate of the currently loaded paper.Enter the result adjusted with [AdjustmentPrint] or the difference with your own measurementin %.Increase the adjustment value to increase the feed amount for paper that tends to expand, andreduce it for paper that tends to shrink.[Adj. Fine Feed] Displayed when [Automatic] or [Print Quality] is selected as [Adj. Priority] for [Feed Priority].Manually adjust the paper feed amount while printing.[Maintenance] [Head Cleaning] Specify Printhead cleaning options.Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substances.Choose Head Cleaning B if no ink is printed at all, or if printing is not improved by HeadCleaning A.[Nozzle Check] Print a nozzle check pattern.[Replace P.head] Not displayed during a warning message that the remaining Maintenance Cartridge capacity islow.When replacing the Printhead, choose Yes and follow the instructions on the screen.[Repl. maint cart] When exchanging the maintenance cartridge, choose Yes and follow the instructions on thescreen.