Chapter 33-4c. Transporting by plane or ship or others or transporting in low temperature environment such as below freezingTransportation procedure1) Remove the paper and roll holder.2) Select [Set/Adj. Menu] > [Prep.MovePrinter] > [Standard].3) Press the [OK] key and perform transportation mode.4) When the message completed the transportation mode appears, turn off the power, and remove the power cord and interface cable and check that the heads arecapped and carriage is locked.5) Attach the cushioning materials and tape.6) Unlock the casters on the stand, and then move the printer slowly by holding the carrying handles at the bottom.If the printer is subjected to strong vibrations when it is moved, it can cause ink leakage or damage to the print head. Be sure to move the printer slowly and carefully.Item Description[Prep. MovePrinter] on the Main menu Perform [Standard].Allowed tilting angle Lengthwise: -30 to +30 degreesRotation: -10 to +10 degreesInk consumption Approximately 580gInk drainage area Drain from all ink passageInk tank Install.Separation of printer and stand They do not need to be separated.Maintenance cartridge Install.There is no need to open a new maintenance cartridge.However, if there is a message instructing to replace the maintenance cartridge or check the remaining ink,replace with new maintenance cartridge before transporting.Replacement of consumable parts There is no need to replace consumable parts.Service support No service support is necessary.
