Canon iPF780 Series Service Manual

Also see for image Prograf iPF785 Series: Setup guide Basic guide User guide User guide

Contents

Chapter 66-15Ink tank error.Press OK and replace ink tank.03830206-2547 MBK2 ink tank ID error Replace with a valid MBK ink tank.Ink tank error.Press OK and replace ink tank.03830207-254A R ink tank ID error Replace with a valid R ink tank.Ink tank error.Press OK and replace ink tank.03830208-254C G ink tank ID error Replace with a valid G ink tank.Ink tank error.Press OK and replace ink tank.03830209-254B B ink tank ID error Replace with a valid B ink tank.Ink tank error.Press OK and replace ink tank.03830212-2544 PM ink tank ID error Replace with a valid PM ink tank.Ink tank error.Press OK and replace ink tank.03830213-2545 PC ink tank ID error Replace with a valid PC ink tank.Ink tank error.Press OK and replace ink tank.03830215-2549 PGY ink tank ID error Replace with a valid PGY ink tank.Maintenance cartridge full.Replace the maintenance cartridge.03841001-2819 Maintenance cartridge full Renew the maintenance cartridge.No Maintenance Cartridge capacity.Replace the maintenance cartridge.03841001-281B Not enough space in the maintenancecartridge prior to cleaningReplace the maintenance cartridge.No maintenance cartridge.Check the maintenance cartridge.03841101-2818 Maintenance cartridge not installed. Install the maintenance cartridge.Maintenance cartridge problem.Replace the maintenance cartridge.03841201-2816 Maintenance cartridge EEPROM error Renew the maintenance cartridge.Maintenance cartridge problem.Replace the maintenance cartridge.03841201-2817 Maintenance cartridge ID error Renew the maintenance cartridge.Push paper a little 03860001-2E06 Waiting for manual feed paper to beinserted.Push the cut sheet a little.Manual printing is selected, but a roll isloaded.Press Load/Eject and remove the roll.03860001-2E0C Data with a cut sheet specification has beenreceived when roll media are loaded.Load cut sheets at the paper tray port.Top paper feed slot is selected.Press OK and load a sheet.03860002-2E02 Data with a cut sheet specification has beenreceived but no cut sheets are loaded.Load cut sheets at the paper tray port.Sheet printing is selected.Press Load/Eject and load sheets.03860002-2E05 Manual feed paper setting job has beenreceived, but no manual feed paper isloaded.Load cut sheet in the manual feed paper slot.Remove the cut sheets. 03860002-2E07 Waiting for manual feed paper to beremoved.Remove the cut sheet.Roll printing is selected, but sheets areloaded.Press OK, remove the sheets, and load aroll.03860002-2E0A Data with a roll media specification hasbeen received when a cut sheet tray isloaded.Replace with roll media.This type of media is notcompatible with HP-GL/2.03860006-2825 Paper type mismatch at HP-GL/2 printing Exchange for the compatible paper to HP-GL/2 beforereprinting.! Cannot print as selected.Another roll is in use.Stop: Stop Printing03860007-2E40 Lower roll data has been received whenthere is print in the upper roll.Press the Stop button to delete the print job.! Cannot print as selected.Another roll is in use.Stop: Stop Printing03860007-2E41 Lower roll data has been received whenthere is print in the lower roll.Press the Stop button to delete the print job.Borderless printng not possible.Check roll position.Online: PrintLoad/Eject: Change Paper03861001-2405 Paper loaded at a position inaccessible forborderless printingCheck to see if a borderless printing spacer is installed.Reload the paper.Borderless printng not possible.Check paper size setting.03861001-2406 Data unfit for borderless printing Check the data, and then print again.Borderless printng not possible.Paper stretched or shrank.Confirm usage cond. of the paper.03861001-2407 Borderless printing disabled (enginedetection)Reload the paper.Borderless printng not possible.Check supported paper.03861001-2408 Borderless printing disabled (unsupportedsize)Check the media size.Insufficient paper for jobOnline: PrintStop: Stop PrintingLoad/Eject: Change Paper03862000-2E09 Not enough roll media on remaining rollmedia quantity detectionRenew the supply of roll media.Insufficient paper for job 03862001-2E31 Not enough roll media Renew the supply of roll media.Insufficient paper for job 03862002-2E32 Not enough roll media (lower roll) Renew the supply of roll media.Cannot adjust printhead.Press Online to clear the error andreadjust printhead.03863000-2820 Printhead registration unadjustable Check the paper on which a pattern is printed for smears.Check the environment for interferences from outsidelight.Clean the printhead.Cannot adjust printhead.Press Online to clear the error andreadjust printhead.03863000-2821 LF unadjustable Check the paper on which a pattern is printed for smears.Check the environment for interferences from outsidelight.Clean the printhead.Cannot adjust eccentric.Press Online to clear the error.03863000-2822 Eccentricity correction disabled Check to see if paper has not jammed.Display message Code* Condition detected Action