Canon iPF780 Series Service Manual

Also see for image Prograf iPF785 Series: Setup guide Basic guide User guide User guide

Contents

Chapter 11-36Setting Item Description/Instructions[InterfaceSetup][EOP Timer] Specify the timeout period before cancellation of print jobs that cannot bereceived by the printer.[TCP/IP] [IPv4] [IPv4 Mode] Choose whether the printer IP address is configured automatically or a static IPaddress is entered manually.[Protocol] [DHCP]/[BOOTP]/[RARP]Specify the protocol used to configure the IP address automatically.[IPv4 Settings] [IP Address]/[Subnet Mask]/[Default G/W]Specify the printer network information when using a static IP address.Enter the IP address assigned to the printer, as well as the network subnet maskand default gateway.[DNS Settings] [DNS Dyncupdate]Specify whether DNS server registration is updated automatically.[Pri. DNSSrvAddr]/[Sec.DNS SrvAddr]Specify the DNS server address.[DNS HostName]Specify the DNS host name.[DNS DomainName]Specify the DNS domain name.[IPv6] [IPv6 Support] Set whether to support IPv6 connection.[IPv6 StlessAddrs] Set whether to use IPv6 stateless address.[DHCPv6] Set whether to use DHCPv6 setting.[DNS Settings] [DNS Dyncupdate]-[StatefullAddr]/[StatelessAddr]Specify whether DNS server registration is updated automatically.[Pri. DNSSrvAddr]/[Sec.DNS SrvAddr]Specify the DNS server address.[DNS HostName]Specify the DNS host name.[DNS DomainName]Specify the DNS domain name.[EthernetDriver]*12[Auto Detect] Specify the communication method. To apply your changes, choose RegisterSetting.Choose On for automatic configuration of the LAN communication protocol.Choose Off to use settings values of Comm.Mode and Ethernet Type.[Comm.Mode] Choose the LAN communication method.[Ethernet Type] Choose the LAN transfer rate.[Spanning Tree] Choose whether spanning-tree packets are supported over the LAN.[MAC Address] Display the MAC address.[Interface Print] Print the interface settings.[Return Defaults] Select [OK] to return the [Interface Setup] settings to factory default.