F Print Image with Actual SizePrints documents at their actual size. This function is available when you have selected the size same as the width ofRoll Paper for either the length or width of the document from the A Page Size list.G Paper SizeAvailable when D Fit Paper Size is selected.Choose the size of the paper you will print on.For details on available paper sizes, see "Paper Sizes →P.578 "Paper sizes compatible with borderless printing are shown in the list.C Enlarged/Reduced PrintingChoose from the following options when this setting is activated.• Resizing Originals to Match the Paper Size →P.61• Resizing Originals to Fit the Roll Width →P.67• Resizing Originals by Entering a Scaling Value →P.72D Fit Paper SizeScales the document image to match the paper size.E Fit Roll Paper WidthScales the document image to match the roll width.F ScalingResizes the document image based on a specified scaling value. Enter a value in a range of 5–600.G Paper SizeChoose the size of the paper you will print on.For details on available paper sizes, see "Paper Sizes →P.578 "H OrientationChoose the printing orientation.• Making the Original Orientation Match the Paper Orientation →P.177K Rotate Page 90 degrees (Conserve Paper)Activate this setting to rotate the document image by 90 degrees before printing.• Conserving Roll Paper by Rotating Originals 90 Degrees →P.157L Paper SourceChoose the feed source, as desired.Options displayed in the list vary depending on the selection in Media Type on the Main sheet.Windows Software > Printer Driver >Page Setup Sheet iPF8154214
