Paper is not cut straightCause Corrective ActionThe paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper.Paper rises by the ends of the cut position before it is cut. Reload the paper correctly.Paper is not cutCause Corrective ActionIn the printer driver, No or Print Cut Guide-line is specified in Auto Cut.Specify Yes in Auto Cut in the printer driver.In MAIN MENU, Eject or Manual is speci-fied in Cutting Mode.Specify Automatic in Cutting Mode in MAIN MENU.Rolls are not cut when you are using the Me-dia Take-up Unit.Either execute Paper Cutting in the Control Panel or lift the Re-lease Lever and cut the roll with scissors.(See "Removing Printed Documents from the Media Take-upUnit.") →P.710The Media Take-up Unit Continues RotatingCause Corrective ActionThere is a foreign object in the path of the Media Take-up Sensor (indica-ted by a dotted line).Remove the foreign object from theMedia Take-up Sensor path. Arrangethe Basket Cloth and Basket Rod sothey do not interfere with the MediaTake-up Sensor.The Media Take-up Sensor cord is not connected to the Right Media Take-up Unit correctly.Reconnect the Media Take-up Sensorcord as follows.1. Turn the printer off.Troubleshooting > Problems Regarding Paper >Paper is not cut straight iPF81512804
