Setting Item Description, InstructionsAuto Head Adj. Advanced Adj. Choose Yes to have the printer print and read a test pat-tern for the automatic adjustment of Printhead alignmentrelative to the nozzle, ink tank, and printing direction.(See "Automatic Straightening of Lines and Colors(Auto Head Adj.).") →P.623Auto Print Choose On to have the printer automatically execute theAdvanced Adj. operations after you replace the Print-head. (See "Automatic Straightening of Lines andColors (Auto Head Adj.).") →P.623Manual Head Adj Choose Yes to print a test pattern for adjustment ofPrinthead alignment relative to the printing direction.Enter the adjustment value manually based on the re-sulting pattern. (See "Manual Straightening of Linesand Colors (Manual Head Adj).") →P.625Auto Band Adj. Standard Adj. Choose Yes to have the printer print and read a band ad-justment test pattern for automatic adjustment of thefeed amount. (See "Auto Band Adjustment (AutoBand Adj.).") →P.632Advanced Adj. Choose this option when using paper other than genuineCanon paper or paper for which printing has been veri-fied by Canon.Choose Yes to have the printer print and read a band ad-justment test pattern for automatic adjustment of thefeed amount. Note that this function takes more timeand requires more ink than Standard Adj. (See "AutoBand Adjustment (Auto Band Adj.).") →P.632Manual Band Adj Choose Yes to print a test pattern for adjusting the feedamount based on the type of paper.(See "Manual Band Adjustment (Manual BandAdj).") →P.633Adjust Length A:High ( Adjust LengthA )B:Standard/Draft ( Ad-just Length B )Prints a test pattern for particular types of paper to com-pensate for paper stretching or shrinkage, after whichyou can enter the amount of adjustment. (See "Adjust-ing Line Length (Adjust Length).") →P.636Head Inc. Adj. Choose Yes to print a test pattern for adjusting the ori-entation of the Printhead. (See "Adjusting Line Mis-alignment (Head Inc. Adj.).") →P.626Interface SetupSetting Item Description, InstructionsEOP Timer Specify the timeout period before cancellation of printjobs that cannot be received by the printer.TCP/IP IP Mode Choose whether the printer IP address is configured auto-matically or a static IP address is entered manually.Protocol DHCP Specify the protocol used to configure the IP address auto-matically.BOOTPRARPIP Setting IP Address Specify the printer network information when using a stat-ic IP address.Enter the IP address assigned to the printer, as well as thenetwork subnet mask and default gateway.Subnet MaskDefault G/WPrinter Parts > Control Panel >Main Menu Settings iPF8159682
