Finisher-J17-347-347-347-34Handling Options7777Finisher-J1Finisher-J1Finisher-J1Finisher-J1The Finisher-J1 is equipped with the following functions: Collate, Group, Offset, and Staplemodes. (See ‘Finishing Functions,’ on p. 7-35.)IMPORTANT••••When the machine is operating in the Transparency Interleaving mode, the Collate, Group, or Staplemode cannot be set .NOTE••••When feeding large-size paper, such as A3, or A4R, pull out the auxiliary tray.Parts and Their FunctionsParts and Their FunctionsParts and Their FunctionsParts and Their FunctionsCAUTIONCAUTIONCAUTIONCAUTION•••• If you open the front cover of the main unit while the front cover of the Finisher-J1 is open, theIf you open the front cover of the main unit while the front cover of the Finisher-J1 is open, theIf you open the front cover of the main unit while the front cover of the Finisher-J1 is open, theIf you open the front cover of the main unit while the front cover of the Finisher-J1 is open, thefront cover of the finisher may close. Take care, as this may result in injury.front cover of the finisher may close. Take care, as this may result in injury.front cover of the finisher may close. Take care, as this may result in injury.front cover of the finisher may close. Take care, as this may result in injury.AAAA Front coverFront coverFront coverFront coverOpen this cover to replace the staple case in thestapler unit, or when a staple jam occurs.(See ‘Replacing the Staple Case in the StaplerUnit,’ on p. 7-63, ‘Removing Jammed Staples fromthe Stapler Unit,’ on p. 7-43.)BBBB Upper left coverUpper left coverUpper left coverUpper left coverOpen to remove jammed copy paper.(See ‘Clearing Paper Jams in the Finisher-J1,’ onp. 7-37.)B A
