What the iR3300/iR2800/iR2200 Series Can Do1-101-101-101-101111Before You Start Using This MachineNOTE••••Settings made in the Additional Functions screen are not changed even when you press .••••For details of how to make custom settings, see ‘Selecting and Storing Settings to Suit Your Needs,’in Chapter 3.••••For details of the System Settings, see ‘System Manager Settings,’ in Chapter 4.••••When the FAX Board is not attached, “Report Settings,” “Custom Fax Settings,” and“Communications Settings” are not displayed.••••When the Printer Kit is not attached, “Report Settings,” ”Printer Settings,” ”Network Settings,”“Remote UI On/Off,” and “Clear Message Board” are not displayed.••••When the Network Interface Adapter is not attached, “Report Settings,” “Network Settings,” “RemoteUI On/Off,” and “Clear Message Board” are not displayed.••••For details of the Custom Fax Setting, Printer Settings, Report Settings, Network Settings andRemote UI On/Off functions, refer to the instruction manual attached to FAX Board, Printer Kit, orNetwork Interface Adapter.••••“Auto Offline” is displayed only when the Network Scan Kit is attached.Functions That Conserve Power ConsumptionFunctions That Conserve Power ConsumptionFunctions That Conserve Power ConsumptionFunctions That Conserve Power ConsumptionYou can conserve power consumption efficiently using the following functions when the machine is not operated.You can conserve power consumption efficiently using the following functions when the machine is not operated.You can conserve power consumption efficiently using the following functions when the machine is not operated.You can conserve power consumption efficiently using the following functions when the machine is not operated.NOTE••••The touch panel display turns off when the machine enters one of these functions.••••You can print data sent from a computer even when the machine enters one of these functions.n Sleep ModeSleep ModeSleep ModeSleep ModeYou can set the machine to enter the Sleep mode whenever you desire, by pressing thecontrol panel power switch. To reactivate the machine, press the control panel power switchagain.NOTE••••Turn the control panel power switch off when not using your machine for a prolonged period of time,for example, at night.••••The Auto Sleep Time can be set from 10 seconds to 4 hours. The default setting is “2 minutes” (See‘Setting the Time Taken to Initiate Auto Sleep After Finishing Operations,’ on p. 3-35.)The Additional Functions screenThe Additional Functions screenThe Additional Functions screenThe Additional Functions screen The System Settings screenThe System Settings screenThe System Settings screenThe System Settings screen
