Making Prints Using the Stack Bypass1-541-541-541-541111Before You Start Using This MachineNOTE••••For details of paper types, see ‘Available Paper Stock,’ on p. 1-61.6666 Press “Done.”Press “Done.”Press “Done.”Press “Done.”When you press “Stack Bypass Setting,” you can set the paper size again.7777 Place your originals, and programme the copy settings.Place your originals, and programme the copy settings.Place your originals, and programme the copy settings.Place your originals, and programme the copy settings.When printing documents stored in a mail box, this procedure is not necessary.NOTE••••When there is no reserved job, continue the procedure from step 2.8888 PressPressPressPress ....When printing documents stored in a mail box, press “Start Print.”Copying starts.NOTE••••If heavyweight paper or envelopes are not fed normally from the stack bypass when printing, curl upthe edge of the paper by about 3 mm before loading it.••••To cancel all settings and return the machine to the standard mode, press .Paper size loaded presentlyPaper size loaded presentlyPaper size loaded presentlyPaper size loaded presentlyPaper size selectedPaper size selectedPaper size selectedPaper size selected
