Sample Reports4-184AppendixDEPT. IDIf Department ID Management is set, the Department ID is printed. Transmission logs are listed according tothe Department ID.ST. TIME (Start Time)The date and time (in 24-hour notation) at which the document started to be transmitted or received areprinted. An asterisk (*) indicates a job that has already been printed. If SSO-H is set as the login service, theuser name used for login is printed below the start time. When the machine cannot specify the user (forexample, when automatically forwarding), the user name is not printed.DESTINATION ADDRESSThe name and fax number of the remote party are printed. If a subaddress or sender's name has beenspecified, it is printed beneath the fax number.NO.The four digit number, that is automatically assigned when the document is accepted for sending or receiving,is printed. Numbers between 0001 and 4999 are for sending, while numbers between 5001 and 9999 are forreceiving.MODEThe communicated contents and the Communication mode are printed.Sending: TX, Delayed TX, Sequential Broadcast TX, Delayed SequentialBroadcast, Transfer TX, Direct SendingReceiving: Automatic RX, Confidential Fax Inbox RX, Memory RX, Transfer RXCommunication mode: ECMLine Type (only displayed when theoptional multi-line FAX Board in installed): 1,2,3PGS.The number of pages that were sent or received is printed.