Paper Drawers2-62Routine MaintenancePaper which has been rolled or curled must be straightened out prior to use.Make sure that the height of the paper stack does not exceed the loading limit mark ( ) at the back ofthe paper drawer.Each paper drawer holds approximately 550 sheets of paper (80 g/m 2 ).If there are instructions on the package of paper about which side of the paper to load, follow thoseinstructions.When the paper is loaded into the paper drawer, the side facing up is the one printed on.If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload it.For more information on the print direction of preprinted paper (paper which has logos or patterns alreadyprinted on it), see “Relationship between Original Orientation and Preprinted Paper Output Chart,” on p.4-50.5 Gently push the paper drawer back into the machine until it clicks intoplace in the closed position.When returning the paper drawer to its original position, be careful not to get your fingerscaught, as this may result in personal injury.You will not be able to make copies or print if you load paper that exceeds the loading limit, or if the paperdrawer is not completely pushed into the machine. Always check that the paper drawers are in place, andthat the paper does not exceed the loading limit.•••••••
