Envelope Feeder Attachment-C2 (Optional) 2-152Routine MaintenanceIf the optional Copy Tray-J1 and Finisher-S1 are attached, envelopes are output to any output tray other than theCopy Tray-J1, even if the Copy Tray-J1 is designated as the output tray destination.If the optional Copy Tray-J1 and Inner 2 Way Tray-D1 are attached, envelopes are output to any output tray otherthan the Copy Tray-J1, even if the Copy Tray-J1 is designated as the output tray destination.If you are printing on envelopes, empty the output tray when up to 10 printed envelopes accumulate in the tray.Envelopes should be stored in a place away from high-temperatures and humidity.If there is a temperature difference between the location where the envelopes were stored and the location wherethe envelopes are being printed, leave the envelopes in the printing location at room temperature before you usethem.Correctly match the paper size dial, size switch, and Envelope Cassette settings in Common Settings (from theAdditional Functions screen) with the size of the envelopes being loaded. Failure to do so may cause paper jams,dirty prints, or make the inside of the machine dirty.The width guides on the envelope feeder attachment can be changed so that the following envelopes can beloaded. Using envelopes other than these may result in paper jams, dirty prints, or make the inside of the machinedirty.- COM10 No.10: Mailwell No.582- Monarch: CatalogGlove No.8: Mailwell No.553- DL: Mailwell/Schneidersone No.11345- Yougata 4: Uzumaki Y-401If you want to adjust the width guides to load ISO-C5 or ISO-B5 envelopes, contact your local authorized Canondealer.••••••••
