Canon iR3570 Service Manual

Also see for iR2270 Series: Product description Printer guide User guide Service manual Service manual

Contents

Chapter 1616-18T-16-16

T-16-17F-16-15COPIER > ADJUST > AESub-item Description LevelAE-TBL Adjusting the character density at image density adjustment1 1 to 9 (Default: 5)Setting a greater value makes characters darker.Setting a smaller value makes characters lighter.If RAM on the reader controller circuit board has been cleared, enter the value fromthe service label.COPIER > ADJUST > ADJ-XYSub-item Description LevelAdjusting the mage read start position- If RAM on the reader controller circuit board has been cleared or the board itself has been replaced, enter the valuefrom the service label.- If the setting of this item has been changed, enter the new value into the service label.ADJ-X Adjusting the optical image head position (image read start position in the subscandirection) 1 1 to 100 (Default: 20)Increasing the value by 1 shifts the image read start position 0.1 mm backward.ADJ-Y Adjusting the CCD read start cell position (image read start position in the mainscan direction) 1 85 to 169 (Default: 144)Increasing the value by 1 shifts the image read start position 0.1 mm outward.ADJ-S Adjusting the optical shading measuring position1 20 to 200 (Default: 40)Increasing the value by 1 shifts the shading measuring position 0.1 mm forward.ADJ-Y-DF Adjusting the main scan position at DF flow read1 50 to 250 (Default: 144)Increasing the value by 1 shifts the image read start position 0.1 mm outward.STRD_POS Adjusting the CCD read start position at DF flow read1 1 to 200 (Default: 100)Increasing the value by 1 shifts the image read start position 0.1 mm to left.Decrease the setting(so that the read startposition moves towardthe leading edge).Increase the setting(so that the read startposition moves towardthe trailing edge).CIS UnitOriginal