Chapter 1616-36NS-PLNWS Limiting the use of PLAIN and LOGIN for SMTP authentication in an environmentof communication packet encryptionThis is set to limit the use of PLAIN and LOGIN for SMTP authentication in anenvironment where communication packets are encrypted 20: Dependent on the SMTP server [Default]1: Do not useNS-PLN Limiting the use of PLAIN and LOGIN for SMTP authentication in an environmentThis is set to limit the use of PLAIN and LOGIN for SMTP authentication in anenvironment where communication packets are not encrypted. 20: Dependent on the SMTP server [Default]1: Do not useNS-LGN Limiting the use of LOGIN for SMTP authenticationThis is set to limit the use of LOGIN for SMTP authentication in an environmentwhere communication packets are encrypted 20: Dependent on the SMTP server [Default]1: Do not useMEAP-PN Changing the HTTP port number of the MEAP application 2 0 to 65535 (Default: 8000)SVMD-ENT Switching how to enter service mode20: [User mode key] -> Simultaneous press of [2] and [*]-> [User mode] (Default)1: [User mode key] -> Simultaneous press of [4] and [9]-> [User mode]SSH-SW Turning the SSH server function ON or OFF20: OFF [Default]1: ONRMT-LGIN Turning remote login to the SSH server ON or OFF20: OFF [Default]1: ONRE-PKEY Turning the regeneration of the SSH server key ON or OFF20: OFF [Default]1: ONU-NAME Setting a user name for connection to the SSH server2Setting value:Up to 8 characters (half-size alphanumeric)U-PASWD Setting a user password for connection to the SSH server2Setting value:Up to 8 characters (half-size alphanumerics)DA-PORT Turning the TOT asynchronous status communication port ON or OFF20: CLOSE [Default]1: OPEN (when DA is attached)DA-CNCT Setting DA connection20: OFF [Default]1: ONCHNG-STS Setting the TOT status connection port number21 to 65535 [Default: 20010]CHNG-CMDSetting the TOT status connection port number21 to 65535 [Default: 20000]MEAP-DSP Turning screen transition from MEAP to Native ON or OFF20: OFF (Transition to the Native screen) [Default]1: ON (No transition to the Native screen)ANIM-SW Turn MEAP application error/jam screen display ON or OFF20: OFF (Display warning screen) [Default]1: ON (Do not display warning screen)MEAP-SSL Setting the MEAP HTTPS port20 to 65535 (same as the setting of another network port system) [Default: 8443]CCD-TYPE Setting the CCD unit type20: Initial CCD unit [Default]1: Revised CCD unitCOPIER > OPTION > BODYSub-item Description Level
