Saddle Finisher-G1/Puncher Unit-K1 7-47Handling Options7Saddle Finisher-G1/Puncher Unit-K1The Saddle Finisher-G1/Puncher Unit-K1 is equipped with the following functions: Collate,Group, Offset, Staple, Saddle Stitch, and Hole Punch mode. (See ‘Finishing Functions,’ on p.7-48.)When the Saddle Finisher-G1 is attached, the Inner 2way Tray-A1 is mandatory.NOTE• When feeding 11" x 17" or LGL-size paper, pull out the auxiliary tray.Parts and Their Functions1 Output trayPaper are output to this tray. You can assign theoutput of specified function setting designatedtrays. (See ‘Setting a Dedicated Tray for EachFunction,’ on p. 3-20.)2 Auxiliary tray3 Upper coverOpen to remove jammed paper. (See ‘ClearingPaper Jams in the Saddle Finisher-G1,’ on p. 7-52.)4 Punch waste trayTake this out when discarding the punch waste.(See ‘Removing Punch Waste,’ on p. 7-70.)5 Release buttenPress to remove the finisher from the main unit.6 Right coverOpen to remove jammed copy paper.(See ‘Clearing Paper Jams in the Saddle StitcherUnit,’ on p. 7-54.)7 Upper front coverOpen this cover to replace the staple case in thestapler unit, or when a staple jam occurs.(See ‘Replacing the Staple Case in the StaplerUnit,’ on p. 7-63, ‘Removing Jammed Staplesfrom the Stapler Unit,’ on p. 7-43.)8 Booklet trayThe paper that is folded and stapled at the centerto form a booklet is delivered to this tray.13685247
