Canon imageCLASS D1370 Basic Operation Manual

Also see for imageCLASS D1320: Service manual Starter Guide

Contents

6-22Using the Fax FunctionsConfigure the following settings to determine how to sendfaxes.For details on the procedure for setting specifications or thesetting items, see the next items.“The steps to take for configuring the send settings” (→P. 6-22)“Options” (→P. 6-22)“The steps to take for configuring the receiving settings”(→P. 6-24)“Options” (→P. 6-25)“The steps to take for configuring the system settings”(→P. 6-26)“Options” (→P. 6-27)The steps to take for configuring thesend settingsFollow the steps in the procedure below to configure the sendsettings.The procedure describes the steps to change the “ECM TX”setting.Keys to be used for this operationOKMenu1 Press [ ] (Menu).2 Select using [ ] or [ ] and press[OK].MenuTimer SettingsCommon SettingsCopy SettingsFax Settings3 Select using [ ] or [ ]and press [OK].Fax SettingsBasic SettingsTX Function SettingsRX Function SettingsRX Print Settings4 Select using [ ] or [ ] and press [OK].TX Function SettingsChange DefaultsRegister Unit Name ...ECM TXPause Time5 Select or using [ ] or [ ] and press[OK].ECM TXOffOn* Select when appears on the screen after youhave specified the setting and press [OK].6 Press [ ] (Menu) to close the menu screen.The procedure is complete.OptionsConfigure the following options to send a fax.Fax SettingsBasicSettings“Register Unit Telephone Number” (→P. 6-23)“Select Line Type” (→P. 6-23)“Off-Hook Alarm” (→P. 6-23)TX FunctionSettings“Change Defaults” (→P. 6-23)“Register Unit Name (Fax)” (→P. 6-23)“ECM TX” (→P. 6-23)“Pause Time” (→P. 6-23)“Auto Redial” (→P. 6-24)“Sender ID” (→P. 6-24)“Check Dial Tone Before Sending” (→P. 6-24)Changing Fax Settings (Settings that Can Be Specified Using the [Menu] Button)