| 
6-22Using the Fax Functions5 Press [ ] or [ ] to select or , andthen press [OK].ECM RXOffOn* When appears in the screen, you must select and press [OK] to apply the setting.6 Press [ ] (Menu) to close the menuscreen.The setting is complete.Setting Items for the Receive SettingsThe receive settings include the following items.Fax RX SettingsRX FunctionSettings “2-Sided Printing (MF4570dn Only)” (P.6-22)“Reduce RX Size” (P.6-22)“RX Page Footer” (P.6-22)“Continue Print. When Toner Is Nearly Out” (P.6-22)Fax Settings “ECM RX” (P.6-22)“Incoming Ring” (P.6-23)“Remote RX” (P.6-23)“Auto RX Switch” (P.6-23)2-Sided Printing (MF4570dn Only)Use this option to save paper by printing on both sides ofeach sheet.How to display the settings[ ] (Menu) Settings> <2-Sided Printing>Settings(Bold: Default settings)Off Prints on only one side of each sheet.On Prints on both sides of each sheet.Reduce RX SizeUse this option to scale images so they fit the selectedpaper size or at a specified ratio, when receiving faxes.How to display the settings[ ] (Menu) Settings> Settings(Bold: Default settings)Off No image reduction.OnRatio: Auto, 97%,95%, 90%, 75%: Reduces the image size byautomaticallyadjusting the reduction ratio.<97%>, <95%>, <90%>, <75%>:Reduces the image according tothe specified ratio.Reduction Direction:Vertical/Horizontal,Vertical Only: Reducesthe image size both vertically andhorizontally.: Reduces the imagevertically only.RX Page FooterSpecify whether or not to print a received date, day of theweek, time, number, and page number at the bottom ofdocuments when printing received documents.How to display the settings[ ] (Menu) Settings> Settings(Bold: Default settings)Off Does not include the page footer.On Includes the page footer.Continue Print. When Toner Is Nearly OutSpecify whether or not to continue printing receiveddocuments when the toner is nearly out.IMPORTANTWhen using this option, some documents may be light or blurry,due to low toner. Beware that data is erased when a received fax isprinted, so you will not be able to reprint a received fax that is toolight or blurred to read.How to display the settings[ ] (Menu) Settings> Out>Settings(Bold: Default settings)Off Printing does not continue when the toner is low.On Printing continues when the toner is low.ECM RXThe ECM (Error Correction Mode) is a function for detectingand correcting errors during fax communication. Using theECM function can diminish receive errors even over poorconnections.NOTECheck the settings for the recipient’s machine alsoThe ECM function is available only when the setting for both thesender’s and recipient’s machines are enabled.Even if the ECM function is enabledAn error may occur due to a poor connection.When the ECM function is enabledIt may take time to receive documents if a problem occurs with thetelephone line.How to display the settings[ ] (Menu) Settings(Bold: Default settings)Off Does not use the ECM function.On Uses the ECM function. |
