| 
6-23Using the Fax FunctionsIncoming RingSpecify whether or not the external telephone will ringduring an incoming call if is set to or.You can also specify the number of ringing times.After the external telephone rings for specified times, themachine automatically starts receiving when receiving afax. When receiving a call, only when is set to, the machine’s speaker rings.How to display the settings[ ] (Menu) Settings(Boldface: Default settings)Off The telephone does not ringduring an incoming call.On Ring Times: 1 to 2 to 99(times)The telephone rings during anincoming call.You can specify the number ofringing times in .Remote RXIf an external telephone is connected, you can switch to thefax receiving mode immediately by dialing the ID numberfor fax receiving using the dial buttons of the telephoneduring a phone call.How to display the settings[ ] (Menu) Settings(Boldface: Default settings)Off Remote receiving is disabled.On Remote RX ID:00 to 25 to 99Remote receiving is enabled.You can specify an ID number for faxreceiving in .Auto RX SwitchSpecify how long an incoming call should ring before themachine automatically switches to fax mode. This option isavailable when the is set to .How to display the settings[ ] (Menu) Settings(Bold: Default settings)OffThe machine will notautomatically switch to faxmode.On Incoming Ring Time: 1to 15 to 99 (seconds)The machine willautomatically switch to faxmode after the specifiedperiod.System Settings ProcedureSpecify the system settings using the following procedure.This section describes the procedure for changing the settingfor “TX Start Speed” as an example.Keys to be used for this operationMenuOK1 Press [ ] (Menu).2 Press [ ] or [ ] to select Settings>, and then press [OK].MenuFax TX SettingsFax RX SettingsAdjustment/Maintena...System Management SeWhen the system manager PIN is specifiedEnter the system manager PIN.“Text Input Method” (P.1-9)When you are finished entering, press[ ] or [ ] to select ,and then press [OK].System Manager PIN*******1 2 3 4 5 6 7 8 9 03 Press [ ] or [ ] to select Management Settings>, and then press [OK].System SettingsSystem Manager Info...Device Information ...Network SettingsCommunication Manage4 Press [ ] or [ ] to select , andthen press [OK].Communication Mgt. SetFax SettingsMemory Lock Settings |
