Canon imageCLASS MP700 Quick Reference Manual

Also see for imageCLASS MP700: User guide

Contents

Chapter 2 Document and print media handling 2-32Document and print media handlingSetting the paper thickness leverThe paper thickness lever adjusts the gap between the printhead and the print media to suitthe print media’s thickness. Before printing, be sure to set the paper thickness lever.Follow this procedure to set the paper thickness lever:Setting the print media size and typeFor copying and receiving faxes, you need to set the size and type of print media loadedin the multi-purpose tray.NOTE• For documents printed from your computer, specify the print media size and type on your computer( Software Guide).• For photo printing, specify the print media size as described in Chapter 4.Follow this procedure to set the print media size and type:1 Press [Copy] or [Fax].2 Press [Paper Select].3 Use [2222] or [3333] to select the print media size.• Select:– for A4-size print media.– for letter-size print media.– for legal-size print media.– for B5-size print media.– for A5-size print media.– <4" × 6"> for card-size print media.– <5" × 7"> for card-size print media.• For received faxes, select , , or .1 Press [Open] q and lift up the scanning unitw.2 Move the paper thickness lever to theappropriate setting.• For details on which position to set for the printmedia you are using, see pp. 2-2 to 2-4.3 Close the scanning unit until it locks into place.qwFax ModelFax ModelS I Z E : < A 4 >T Y P E : P L A I NFax Model