Canon imageCLASS MP700 Quick Reference Manual

Also see for imageCLASS MP700: User guide

Contents

Chapter 10 Troubleshooting 10-310Troubleshooting2. Has ink run out?If nothing prints or one of the colors does not print, check if the ink tanks are empty. Replace the inktank(s) if necessary. Also, make sure the orange tape has been completely removed from the ink tanks.3. Print the nozzle check pattern ( Maintaining the printhead, p. 9-3). Copy quality is poor (or documents are printed with streaks).1. Are you copying a document or photograph printed from your machine?Image quality may be poor when you copy a document or photograph printed from your machine. Tryprinting the photograph from the memory card, or the document from your computer.2. Clean the scanning area ( User’s Guide) and the ADF area ( User’s Guide).3. Clean the printhead ( User’s Guide).4. Does the LCD show the correct type of print media loaded?If not, set the print media type ( p. 2-2).5. Is the image quality displayed in the LCD suitable for the document?If not, set an image quality suitable for the document ( p. 5-2). Problems scanningFor detailed information on “Problems scanning”, refer to the User’s Guide or the SoftwareGuide. Problems receiving faxesSee below if you are having problems receiving faxes. Cannot receive a fax, cannot print a fax.1. Is there anything displayed in the LCD?If nothing is displayed, see p. 10-9.2. Is the Alarm light blinking?If it is blinking, see p. 10-12.3. Is the machine making a noise and is the In Use/Memory light blinking?A telephone (or other peripheral device such as an answering machine or computer modem) isconnected to the L jack. Reconnect to the t jack ( Set-Up Sheet).PUSUYellowMade in JapanInk TankBCI-3eYRemove the tape up to the perforationsCorrect Tape not removed completelyFax Model1 0 0 % A 4 T E X TP L A I NImage qualityPrint media type