| 
5-2 Copying —Basic operation Chapter 5Adjusting the image quality (resolution)Refer to Making copies on p. 5-1 and in step 4, adjust the image quality as follows:1 Press [Image Quality].2 Use [2222] or [3333] to select the image quality.• In black & white mode, select:– for text-only documents.– for photographs.– for high-speed copying at a lower resolution.*• In color mode, select:– for color text-only documents.**– for color photographs.– for high-speed color copying at a lower resolution.*3 Press [OK].NOTE• When using , if the color output is different from that expected, select or and try copying again.Adjusting the contrast (density)Contrast (density) is the degree of difference between light and dark. A high contrast settingwill make blacks darker and whites brighter, whereas a low contrast setting will make thedifferences between black and white less marked.Refer to Making copies on p. 5-1 and in step 4, adjust the contrast as follows:1 Press [Contrast].2 Use [2222] or [3333] to select the contrast.3 Press [OK]. More informationFor detailed information on all copying features, refer to the User’s Guide.* This setting is only available when is selected as the print media type ( p. 2-3).** This setting is not available when or is selected as the print media type ( p. 2-3). |
