3-18Chapter 3 Basic OperationThe Properties dialog box for the ISIS driver opens.8. Set the scan settings.HintFor more information on specifying the scan settings, see “ISIS/TWAIN Driver Settings Dialog Box” on p. 8-4.9. Click the [OK] button to exit the scanner settings.10. Specify the file name and the file type for saving theimage data.For details on the available settings in the [Scan Batch toFile Setting] dialog box, refer to the CapturePerfect 3.0Operation Guide.11. Place your document and click [Save] to startscanning.IMPORTANTYou must load your documents as described below, dependingon the specified Feed Option setting.• If the [Standard Feeding] Feed Option is enabled, load yourdocuments before scanning. When all of the documents havebeen scanned, the Continue Scanning dialog box appears.• If the [Manual Feeding] Feed Option is enabled, theSeparation Off key is lit and the Document Feed Tray israised. You must insert one page at a time to be scanned, andpress the Stop key to display the Continue Scanning dialogbox.• If a Feed Option other than [Standard Feeding] or [ManualFeeding] is selected, once you have started scanning, eachdocument placed in the Document Feed Tray is scanned, andwhen no document is loaded, the scanner enters the standbystate.Separation Off Key
