Canon imageFormula DR-9050C User Manual

Also see for 3622B002: Brochure & specs

Contents

5-7Chapter 5 MaintenanceRemoving and Reinstalling the RollersFollow the procedure shown below to remove and reinstallthe rollers when you need to clean or replace the Pickup,Feed, or Retard Rollers.CAUTION• Turn OFF the power switch, and disconnect the power plug fromthe power outlet when you remove or reinstall the rollers. Leavingthe power turned ON may result in an electric shock.• Do not place excessive force on the rollers when removing orreinstalling the rollers. Deformation of the rollers may cause feederrors.■ Removing and Reinstalling the Pickup Roller1. Press the Open/Close button and carefully raise theupper unit until it stops.2. Open the roller cover.3. Open the roller holder.HintThe roller holder returns to its original position when released.4. Remove the pickup roller.Pickup RollerFeed RollerRetard RollerOpen/Close Button