3-21Chapter 3 Basic OperationHow to Use Patchcode SheetsThis section describes how to use patchcode sheets withCapturePerfect 3.0.1. Print the patchcode sheets on a printer.IMPORTANT• Print (at original size) PATCH T (A4) and PATCH II (A4)sheets on A4 paper, or PATCH T (LTR) and PATCH II (LTR)on LTR paper.• The scanner may not recognize the patchcodes if they areenlarged or reduced.2. Insert the patchcode sheet in front of the documentthat you want to save as a separate file beforeplacing the documents on the scanner.3. On the [Other] tab of the ISIS driver properties, select[Patchcode] from the Batch Separation drop-downlist.IMPORTANTIf the patchcode decoder is not installed, the [Patchcode] batchseparation setting is not displayed. (See “Batch Separation” onp. 8-20.)4. Perform scanning with batch separation enabled.5. Set the [Type of batch separation] setting to [Scan,Continue Scanning] or [Skip, Continue Scanning].Hint• If [Scan, Continue Scanning] is selected or if the patchcode isPATCH ll type, the patchcode sheet image is also saved andscanning continues.• If [Skip, Continue Scanning] is selected and the PATCH Tpattern is detected, the patchcode sheet image is not savedand scanning continues.Insert patchcode sheets in front ofthe documents you want to save asseparate files.
