Control PanelInterface SetupSetting Item Description, InstructionsEOP Timer Specify the timeout period before cancellation ofprint jobs that cannot be received by the printer.IP Mode Choose whether the printer IP address iscongured automatically or a static IP addressis entered manually.DHCPBOOTPProtocolRARPSpecify the protocol used to congure the IPaddress automatically.IP AddressSubnet MaskTCP/IPIP SettingDefault G/WSpecify the printer network information whenusing a static IP address.Enter the IP address assigned to the printer, aswell as the network subnet mask and defaultgateway.NetWare Specify the NetWare protocol. To apply yourchanges, choose Register Setting.Frame Type Specify the frame type to use.NetWarePrint Service Choose the print service.AppleTalk Specify whether to use the AppleTalk protocol.To apply your changes, choose RegisterSetting.Auto Detect Specify the communication method. To applyyour changes, choose Register Setting.Choose On for automatic conguration of theLAN communication protocol. Choose Offto apply Comm.Mode and Ethernet Typesettings.Comm.Mode Choose the LAN communication method.Ethernet Type Choose the LAN transfer rate.Spanning Tree Choose whether spanning-tree packets aresupported over the LAN.EthernetDriverMAC Address Displays the MAC address.Ext. Interface Specify whether or not to use the optionalexpansion interface when it is installed.ReturnDefaultsReturn Defaults/Execute? is displayed if youpress the ▼ button. Choose OK to restore thenetwork settings to the default values.Printer Parts 61
