Setting File Server (File Sharing)5-24Setting up Computers to Use Print and Send Functions5NOTESelect the [Full Control] box so that you can store data scanned with thismachine on a computer (the file server).❑ Click [OK] to close the [Permissions for ] dialog box.❑ If the [Security] tab is displayed in the [ Properties], click the[Security] tab to set the local-level access permission. If not, proceed to step 7.NOTEThe [Security] tab is not displayed when:• The drive to which the shared folder is set is formatted in FAT16 or FAT32.• Simple file sharing is enabled.❑ Click [Add...] to open the [Select Users or Groups] dialog box.❑ Type “Everyone”.❑ [Check Names] ➞ make sure that the correct object name is typed.NOTEIf the object name is entered incorrectly, the [Name Not Found] dialog box isdisplayed. If this happens, click [Cancel] to check whether or not the computername and user name are incorrect.❑ Click [OK] to close the [Select Users or Groups] dialog box.❑ In the [Security] sheet, under [Name], select [Everyone]. Select the [Full Control] boxunder [Allow].NOTESelect the [Full Control] box so that you can store data scanned with thismachine on a computer (the file server).● If you are using Windows XP:❑ Select the [Share this folder on the network] and [Allow network users to change myfiles] check boxes under [Network sharing and security].For Windows 2000 For Windows Server 2003
