System Setting Items 9-7Appendix9E-mail/I-Faxp. 3-52SMTP Receive On, OffPOP On, OffAuthentication/EncryptionPOP Authentication before Send: On, OffSMTP Authentication (SMTP AUTH): On, OffDisp Auth Screen When Sending*4: On, OffCarry Over Authentication*4: On, OffUser: User name for SMTP authentication (64Characters maximum)Password: Password for SMTP authentication (32Characters maximum)Allow SSL (POP): On, OffAllow SSL (SMTP Send): On, OffAllow SSL (SMTP Receive): SSL, On, OffThe settings to verify the SSL server certificatesfor POP/SMTP are available on the Remote UI.See Chapter 4, “Customizing Settings,” in theRemote UI Guide.SMTP Server Server name or IP address (47 Charactersmaximum)E-mail Address 64 Characters maximumPOP Server Server name or IP address (47 Charactersmaximum)POP Address 32 Characters maximumPOP Password 32 Characters maximumPOP Interval 0 (Off) to 99Startup Time Settings p. 7-3Startup Time Settings 0 to 300 seconds, 0 sec(s)IEEE802.1X SettingsIEEE802.1X SettingsOn, OffLogin Name: 24 characters maximumUse TLS: On, OffKey and Cert.: Select the default key andcertificate from the listUse TTLS: On, OffTTLS Internal Protocol: MSCHAPv2, PAPUse PEAP: On, OffUser: 24 characters maximumPassword: 24 characters maximumLogin Name as User Name: On, Offp. 2-10Item Settings ApplicablePage
