3Setting Specifications That Are Common to Each Function (Common Settings) 3-13Selecting and Storing Settings to Suit your NeedsSetting a Paper Drawer for Auto Paper Selection/AutoDrawer SwitchingYou can set the paper drawers to be used for Automatic Paper Selection and Auto DrawerSwitching. This setting can be made independently for Copy, Mail Box, and other functions.This function is useful when different paper drawers are to be used for different purposes.NOTE• Paper drawers set to “On” are used for the following functions:- Auto Paper Selection (APS): The machine automatically selects the appropriate paper size (paperdrawer) for the size of the original and the set ratio (when making a copy), or of the image (whenreceiving a fax).- Auto Drawer Switching (ADS): If a paper drawer runs out of paper during a continuous printing job,the machine automatically selects another paper drawer with the same paper size and beginsfeeding paper from that paper drawer.• The default settings are “Off” for the stack bypass and “On” for the paper drawers (1 to 4).1 Call up the desired screen as follows:2 Select “Copy,” “Mail Box,” “Printer,” or “Other (“Fax”).”“Printer” can only be set when the Printer Kit is attached.“Other” is displayed when the FAX Board is not attached, and sets the paper drawers to beused for report printing.“Fax” can only be set when the FAX Board is attached. And, when the FAX Board isattached, set the paper drawers to be used for report by pressing “Fax.”(Additional Functions)Drawer Eligibility For APS/ADSWhen only the Printer Kit isattachedWhen the Printer Kit and the FAXBoard are attached
