5Loading Paper5-4Routine MaintenanceIMPORTANT• Rewrap any remaining paper in its original package, and store it in a dry place, away fromdirect sunlight.• Do not load the following types of paper in the paper drawer. Doing so may cause a paperjam.- Severely curled or wrinkled paper- Heavyweight paper- Transparencies- Paper on which color images have been copied.- Paper which has been copied on using a digital full color copier (do not copy on the reverseside either).- Paper which has been printed on using a thermal transfer printer (do not copy on thereverse side either).NOTE• For high-quality print output, use paper recommended by Canon.4 Turn the opened surface of the paper stack over, and place it in thepaper drawer.Even out the edges of the paper stack. Load the paper stack against the right wall of thepaper drawer.When loading paper in the paper drawer for the first time, set the size plate for the paperbeing loaded.When loading paper in the paper drawer, make sure that the paper size setting of thepaper drawer matches the size of paper.IMPORTANT• If the paper is curled, curl it down before placing it in the paper drawer.• Make sure that the height of the paper stack does not exceed the limit mark at the backof the paper drawer.NOTE• Each paper drawer holds about 500 sheets of paper (20-lb bond (80g/m2)).• For details of the print direction of paper already printed with logos or patterns, see‘Relation of Original Orientation and Paper Orientation,’ on p. 8-9.
