Specifying Common Settings4-624Customizing SettingsErasing the Remaining Toner Error MessageYou can erase the Remaining Toner Error Message screen, which is displayedwhen the remaining toner is low, if Display Remaining Toner Error Message inSystem Settings (from the Additional Functions screen) is set to 'On'.NOTE[Erase Remaining Toner Error Message] is displayed only if Display Remaining TonerError Message in System Settings (from the Additional Functions screen) is set to 'On'.(See "Displaying the Remaining Toner Error Message," on p. 6-42.)1 Press (Additional Functions) ➞ [Common Settings] ➞[Erase Remaining Toner Error Message].2 Press [Yes].The Remaining Toner Error Message screen will be displayed again when adifferent color toner becomes low.Returning the Common Settings to Their DefaultsYou can restore all of the Common Settings to their defaults (initial settings).NOTE• If you set Language Switch to 'On', and then return the Common Settings to their defaultsettings, Language Switch is turned 'Off', but the language shown on the touch paneldisplay remains unchanged. (See "Changing the Language Shown on the Touch PanelDisplay," on p. 4-55.)• If you set Limited Functions Mode to 'On', and then return the Common Settings to theirdefault settings, the setting for the Limited Functions Mode remains unchanged.• Image forms registered for Register Form for Form Composition are not erased.1 Press (Additional Functions) ➞ [Common Settings] ➞[Initialize Common Settings].2 Press [Yes].
