Placing Originals2-342Basic OperationsPlacing OriginalsPlace your originals on the platen glass or into the feeder, depending on the sizeand type of the original, and the copy modes that you want to use.NOTEIf the original has too many pages to be placed in the feeder all at once, use the Job Buildmode on the Special Features screen. (See Chapter 4, "Special Copying and Mail BoxFeatures," in the Copying and Mail Box Guide or Chapter 4, "Special Scanning Features,"in the Sending and Facsimile Guide.)■ Platen GlassPlace the originals on the platen glass when copying bound originals (such as books andmagazines), heavy or lightweight originals, and transparencies.■ FeederPlace the originals into the feeder when you want to copy several originals at the sametime, and press (Start). The machine automatically feeds the originals to the platenglass and scans them. Two-sided originals can also be automatically turned over andscanned as two-sided documents.Document SizesThe size of the original is automatically detected, and the document is scanned.When you are sending fax documents, if the output paper in the recipient's machineis not equal to the scanned document size, the original image may be eitherreduced in size or divided into smaller parts before it is sent.The machine cannot always detect the size of the original if it is a nonstandardpaper size, such as a book. In this case, specify the size at which you want to scanthe original. (See Chapter 3, "Basic Scanning Features," in the Sending andFacsimile Guide.)
