Canon imageprograf IPF785 Service Manual

Also see for imagePROGRAF iPF780: User guide User guide

Contents

imagePROGRAF iPF785/780 Service GuideimagePROGRAF iPF785/780 Service Guide August 2014Page 13F. Installation Space RequirementsThe imagePROGRAF iPF785/780 printer’s approximate installation spacerequirements may differ, depending on how the printer is configured and theoptional accessories attached. Always ensure that there is enough space forservice and operation of the device.Refer to the imagePROGRAF iPF785/780 Series Service Manual for detailson transportation and installation of the imagePROGRAF iPF785/780 printer.IMPORTANT• Make sure that approximately 24" (600 mm) of space is left around thefront, 0.4" (10mm) is left at the back, and a minimum of approximately 8"(200 mm) of space is left around the left, and right sides of the printer forthe proper servicing of the equipment.• The floor must be level (with no bows) and flat for the stabilization andsupport of the printer.• The weight of the printer is primarily supported by the wheels.• Elevators used to transport the printer must have a minimum depth ofapproximately 62" (1,575mm). Additional room may be needed tonavigate turns.• The printer should never be tilted until a “move” operation has beenperformed. Refer to the Service Manual for specific details.The approximate space requirements for the imagePROGRAF iPF785/780printer installation are shown below.Table 16 – imagePROGRAF iPF785/780 Printer Installation Space RequirementsHeight and Depth