Carmanah 502 Owner's Manual

Contents

Carmanah 502 Owner's Manual Manual pdf 11 page image

Owner’s Manual | Model 50211© 2008 Carmanah Technologies CorporationRevised: August 20085.0 Testing the BatteryStoring a light in a low state of charge can damage the battery and cause it to lose its ability to hold acharge. To determine the state of charge of the batteries in a light, transition the light, if needed, andenter code 8 1 0; the light will respond with a series of flashes: Single flash: the state of charge is less than 30% Two flashes: the state of charge is greater than 30%, but less than 75% Three flashes: the state of charge is greater than 75%For information on recharging the light see section 6.0 Recharging a Light.Testing the light battery:1. Transition the light (if required).2. Enter the security code (if required).3. Enter code 8 1 0 to test the battery.4. Count the number of flashes from the light.8 1 0