Carmanah A704-5 Owner's Manual
                                                   | |
Contents
| 
Owner’s Manual | Model A704-5 Aviation Lighting System10© 2008 Carmanah Technologies CorporationLast revised: April 20084. Place all the lights physically close together – preferably in a dark place that is dark enough toobserve the LED operation and so that the light thinks that it is night.5. The lights will all be in Ship Mode. To get the lights out of Ship Mode, quickly press the small blackpush button switch on the top of the light (to the left of the handle) twice. Quick presses are required –do not hold the button down for more than half a second. (If the lights are in a dark location, they willturn on in the Autonomous Low setting shortly after the button presses.)The lights are now ready to accept further programming commands using either the push button, or thewireless controller (for lights with the wireless control system). The lights can now be deployed, and willoperate in the equipped mode (Autonomous Low) from dusk until dawn.For further information on programming and advanced operation see section 4.3 Programming Options.4.3 Programming OptionsThere are two options for programming the Model A704-5 light:Push Button: The black push button on the top of the Model A704-5 allows manual programming of theModel A704-5 features and operation.Wireless Controller: The wireless controller is capable of performing all push button operations as wellas several advanced operations. See section 5.0 Wireless Controller Operation.4.3.1 Indicator LEDsLocated near the push button inside the lens are three small indicator LEDs that light up as either green,amber or red. (See section 3.0: Component Identification).Indicator LEDs are used to: Guide push button operation (for more detail, see section 4.3.2 Push Button Operation) Indicate diagnostic information such as battery state of charge Indicate operating state after the button has not been used for 10 seconds: The green indicator LED flashes once every 2 seconds when the light is not in Ship Mode oroptional Infrared Mode. The amber indicator LED flashes once every 2 seconds when the light is charging, using its solarpanels, or once every second when charging via the external power connector. When the light is in Ship Mode, no indicator LEDs will light unless the light is charging. When the light is in Infrared Mode (optional), no indicator LEDs will light or flash. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine