Carrier CÔR TP-WEM01 Owner's Manual

Also see for TP-WEM01: Installation instructions Installation guide Advanced installation and configuration instrucrions

Contents

Carrier CÔR TP-WEM01 Owner's Manual Manual pdf 22 page image

22On the Web Portal:1. Select Settings tile.2. Select Preferences.3. Select Thermostat name4. Select an existing name from the list or choose Custom Name and enter your own).5. Select Update NameScreen BrightnessYou can customize the brightness of your thermostat’s screen. The brightness for both the active and standby screens can be configuredindependently. You can also configure the screen to automatically sleep (i.e. turn off) whenever your thermostat enters the Sleep ComfortProfile.Hint: if your thermostat is located in a bedroom, you may want to blank the screen when you are sleeping, whereas if the thermostat is in ahallway, you may want the screen brighter all the time.On Thermostat:1. Touch Menu > Settings > Preferences2. Select Screen brightness.3. Adjust the values of the active and standby brightness.4. Touch Screen sleeps when I sleep if you want to make the screen blank during the Sleep Comfort Profile.5. Touch Save.Active to Standby TimerYou can configure how long it takes for the standby screen to activate after you have finished using the thermostat.On Thermostat:1. Touch Menu > Settings > Preferences2. Touch Activate to standby timer.3. Adjust the activation time as required4. Touch Save.Default Touch--N--Go Hold TimeYou can configure how long a manual change to the set point will remain in effect.On Thermostat:1. Touch Menu > Settings > Preferences2. Touch Default Touch--N--Go hold time action3. Touch the hold action from the list:d Hold until your next schedule eventd Hold until you change itd Hold until a specific timed Always ask youOn Web Portal:1. Select Settings tile.2. Select Preferences.3. Select Hold Action.4. Select the hold action from the list:d Hold until your next schedule eventd Hold until you change it