Carrier CÔR TP-WEM01 Owner's Manual

Also see for TP-WEM01: Installation instructions Installation guide Advanced installation and configuration instrucrions

Contents

Carrier CÔR TP-WEM01 Owner's Manual Manual pdf 7 page image

7Use the bottom Touch--N--Go button to select the length of time you wish to stay in that profile or resume your schedule.A150008NOTE: You adjust your default Touch--N--Go hold time in the Preference menu.Selecting System Operation ModeThe Fan and Mode drop--down menus in the upper right and left corners of the Home Screen allow you to quickly change the operating modeof your system. You can also use the System menu to control the basic operation of your HVAC system, including the operation ofaccessories like humidifiers, dehumidifiers, and ventilators.HVAC System ModeThe HVAC System settings displayed in the Mode drop--down on the Home Screen and System menu depend on the type of system youhave. Depending on your system, one or more the following options are shown:S Cool: Turn on cooling when the current temperature rises above your setpoint temperature.S Heat: Turn on heating when the current temperature drops below your setpoint temperature.S Auto: Activate the heating or cooling system as required to keep your home within the configured range of setpoint temperatures.S Aux: Only use the auxiliary or backup heat source to maintain the heat set point temperature. This option only appears if auxiliary heat wasconfigured during installation.S Off: Turn the system off. When the system is off, only the current temperature and humidity will be displayed on the Home Screen.A150009On Thermostat and Smartphone App:From the Home Screen, touch Mode in the upper right corner of the screen. OR: touch Menu > System > HVAC Operating ModeOn Web Portal:Touch Mode in the upper right corner of the Home Screen tile. OR: touch the My System Tile.