EnglishOther Useful Digital Piano FunctionsE-53You can store up to four “user scales” configured by you inmemory for later recall when you need them.■ To save a user scale1. Press bs.2. Press 5.3. While holding down cr, press a button from cnto cq to select an area.■ To recall a user scale1. Press bs.2. Press 5.3. Use buttons cn to cq to select the user scaleyou want to recall.You can use the following procedure to apply a user scale toAuto Accompaniment.1. Press 7 and then use the cl (10-key) [4] (u)and [6] (i) keys to display “OTHER” (pageE-6).2. Press cl (10-key) [7] (ENTER) key.3. Use the cl (10-key) [4] (u) and [6] (i) keys todisplay “AcompScl”.4. Use the cl (10-key) [–] and [+] keys to select onand off.■ Saving Data on an External Device• SD memory card (page E-58)• Computer (page E-65)■ Maintaining Data in User Scale MemoryAfter you save data in user scale memory, it will remain thereas long as power is supplied to the piano. However, if youdisconnect the AC adaptor, data in user scale memory will bedeleted.Selecting a Music Preset instantly changes the Digital Pianoto a preset setup (tone, rhythm, tempo, etc.) for play of songsof various genres/categories. The press of a button sets upthe Digital Piano so those songs sound exactly the way youthought they should.• See the separate “Appendix” for a complete list of the 305Music Presets that are available.1. Hold down bt until the indicator shown belowappears on the display.2. Use cl (10-key) to select the preset number youwant.This will change the setup (tone, rhythm, etc.) of thepiano.• At this time the Digital Piano will go into AutoAccompaniment synchro start standby (page E-39).• Pressing br, bs, or bt will return to the screen that wasdisplayed before you held down in step 1, above.3. Play along on the keyboard with theaccompaniment.Saving User ScalesUsing a User Scale for Auto AccompanimentO T H E RFlashesUsing Music PresetI L o v e H e rPreset number Preset nameLightsCDP200R_04_e.fm 53 ページ 2008年5月1日 木曜日 午前10時19分