20IPL (Initial Program Loading)Via inlineInline Max. 32 terminalsMaster Satellite 1 Satellite 31Operation (satellite)1. Turn OFF the all of the satellite register(s).2. While holding down , turn the mode switch to PGM.3. Release .4. Enter “44449999” and press .5. Enter “D 4D3D 2D1” and press .D4 D3: 2-digit of machine ID for IPLD2 : Always “1”.D1 : 1-digit of baud rate designation, “0” means 156k bps, “1” means 312k bps.6. Follow step 2 ~ 5 for all satellites to be IPL.Operation (master)1. Turn to PGM mode.2. Enter “7” and press .3. Enter “150” and press .4. Enter “49” and press .(In case of quitting, press instead of .)Via memory cassette (to send the IPL data to memory cassette)Operation1. Turn OFF the register.2. Open the memory cassette door/printer subcover (CE-T300, TK-T500) and insert the memory cassette securely.(Please check that the memory cassette is vacant. Refer to the “System utility chapter (P7)”.)3. Turn to PGM mode.4. Enter “7” and press .5. Enter “170” and press .6. Enter “49” and press .(In case of quitting, press instead of .)7. Turn OFF the register and pull out the memory cassette.(For avoiding erasing the IPL data, please turn on the write protect switch of the memory cassette.)(CE-T300, TK-T500)RAC-9RAC-9Memory cassetteMemory cassetteWrite protect switchMemory cassette- Version 1.0.1
