25InitializationCE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's ManualnoitpircseD eciohC edocmargorPetarduabenilnI 0=spbk651 1=spbk213 :D3)23~10(.D.IlacisyhpenilnI tnacifingiSsrebmun ::D 2 D1Worksheet (Initialize 2)Flag clear operation1. Plug the power code into an AC outlet.2. Set the mode switch to OFF position.3. While holding down f, set the mode switch to PGM.4. Release f.You should see “FFFFFFFFFF” on the display.If 10 Fs are not shown or another character are shown,immediately set the mode switch to OFF and restart fromthe beginning of this procedure.5. Press s to complete.REG2 X1REG1 Z1OFF X2/Z2RFPGM REG2 X1REG1 Z1OFF X2/Z2RFPGMJOURNALFEEDRECEIPTFEEDJOURNALFEEDRECEIPTFEEDAfter completion of flag clear, receipt is issued.Note:Please check the receipt after initialization operation (machine initialization, flag clear operation and init2) that the machinenumber is printed properly.If error codes are printed on it, check the hardware and retry the operation.(For TK-6000/6500 without I/O-PB-14, the error “0004-98 2000” is always printed.)INIT 03-04-2000 11:58C01 MC#01 000001INIT(C) 2000 by CASIOCOMPUTER CO.,LTD.All rights reserved.TK-6000/6500 STDNo. :nnnnLABEL :nnnnnnNo. :nnnnLABEL :nnnnnnINIT :nnnnnnnnnnnnnn0004-98 2000— Mode symbol/date/time— Clerk descriptor/Mc-No./consecutive No.— INIT symbol— Copyright— Model name— ROM version— ROM label— ROM version— ROM label— Initialization code— I/O parameter table record No./error code
