Casio CTK6000 User Manual

Also see for CTK6000: User guide

Contents

Casio CTK6000 User Manual Manual pdf 113 page image

Using a Memory CardE-111Error MessagesDisplay Message Cause Required ActionFormat 1. The current memory card format is not compatible with thisDigital Keyboard.1. Format the memory card on the Digital Keyboard (pageE-103).2. The memory card capacity is greater than 32GB. 2. Use a memory card with a capacity of 32GB or less.3. You are trying to use an SDXC card. 3. SDXC cards not supported. Use an SD or SDHC memorycard.4. There is something wrong with the memory card. 4. Use a different memory card.Card Full There is not enough room available on the memory card. Delete some of the files on the memory card to make room fornew data (page E-107), or use a different card.Card R/W Memory card data is corrupted. Use a different memory card.No Card 1. The memory card is not loaded correctly in the DigitalKeyboard’s card slot.1. Correctly load the memory card into the card slot.2. The memory card was removed while some operation wasin progress.2. Do not remove the memory card while any operation is inprogress.No Data You tried to save a Digital Keyboard user area (user rhythm,user rhythm song, etc.) that does not contain any data to thememory card.Select a user area that contains data.No File 1. There is no MUSICDAT folder (page E-105) on thememory card.1. Create a MUSICDAT folder on the memory card or formatthe memory card on the Digital Keyboard (page E-103).2. There is no loadable or playable data in the MUSICDATfolder.2. Move the file you want to load or play into the memorycard’s MUSICDAT folder.Not SMF0/1 You are attempting to play back SMF Format 2 file. This Digital Keyboard supports playback of SMF Format 0 orFormat 1 only.Protect The memory card is write-protected. Use the memory card’s write protect switch to enable writing.Read Only A read-only file with the same name you are trying to use isalready stored on the memory card.• Use a different name to save the new file.• Remove the read-only attribute from the existing file andoverwrite it with the new file.• Use a different memory card.Size Over 1. The data on the memory card is too big to play. 1. This Digital Keyboard supports playback of song data fileswith a maximum size of about 320KB.2. The data you are trying to load is too large. 2. The following is the approximate maximum data sizes (perdata item) when loading data into Digital Keyboardmemory.User rhythm: 32KBSong sequencer song: 320KBUser preset: 8KBA total of approximately 64KB of user presets (total of all50 user presets) can be loaded.Wrong Data 1. The memory card data is corrupted. Use a different memory card.2. The memory card contains data that is not supported bythis Digital Keyboard.Meas. Limit You tried to perform an operation during song sequencersong editing or user music preset editing that would cause thenumber of measures in the song or chord progression toexceed 999.Make sure your edits do not cause the number of measuresto exceed the 999-measure limit.Memory Full 1. There is not enough memory capacity required for rhythmeditor operations.1. Select the rhythm you want to use.2. Remaining memory capacity became too low during musicpreset editing.2. Referring to “To clear user preset data” (page E-55), deleteuser presets you no longer need in order to free upmemory.3. There is not enough memory capacity required for songsequencer operations.3. Delete other tracks and/or songs to free up memory space.File Name When renaming a file on a memory card, attempting tospecify a file name that is already used.Use a different name.