Casio CTK6000 User Manual

Also see for CTK6000: User guide

Contents

Casio CTK6000 User Manual Manual pdf 42 page image

Using the MixerE-401. Press the C-5 (MIXER) button.• This causes the mixer screen to appear.2. Use the R-17 (u, i) buttons to select themixer parameter you want to change.• You can select master (MASTER), effect (DSP),microphone input (MIC/INST), or a part (A01 throughA16, B01 through B16). The currently selected settingis shown in the line two of the display.• While a part is selected, you can toggle betweenGroup A and Group B by pressing both of the R-17 (u,i) buttons at the same time.3. Use the R-17 (t, y) buttons to move the thickbrackets (%) to the parameter you want tochange.• The parameters that can be configured depend on thecurrently selected setting. For details, refer to thesections shown in the table below.• When you move the thick brackets (%) to one of thesetting values of a part parameter, all of the partparameter values of the group (A or B) to which the partbelongs are indicated by level meter black boxes.4. Use the dial or R-14 (–, +) buttons to change thesetting value.• Pressing the R-14 (–, +) buttons at the same timereturns a parameter to its initial default setting.• While the “Part” (part on/off) setting of a part parameteris being configured, pressing both of the R-14 (–, +)buttons at the same time will change the setting to “Sol”(Solo). For details, see “Part Parameters” (page E-44).5. Repeat steps 2 through 4 as required toconfigure other parameters.6. To exit the mixer, press the C-5 (MIXER) buttonor the R-15 (EXIT) button.• This exits the mixer screen.• While master (MASTER), effect (DSP) or microphone input(MIC/INST) is selected in step 2 above, setting, you alsocan perform normal keyboard play (play using layer, split,and Auto Accompaniment).• While an individual part (A01 through A16, B01 throughB16) is selected in step 2 above, pressing a keyboard keywill sound only notes of the selected part. All other types ofperformance operations (layer, split, Auto Accompaniment,etc.) are disabled.Mixer OperationTo change mixer parametersCurrently selected setting(MASTER, DSP, MIC/INST, or A01 to A16/B01 to B16)Parameter/Setting valueCurrently selected setting part(when currently selected setting is A01 to A16/B01 to B16)When this setting isselected:These parameters can beconfigured:MASTER MASTER parameters(page E-42)MIC/INST MIC/INST parameters(page E-43)DSP DSP parameters (page E-42)A01 to A16/B01 to B16 Part parameters (page E-44)