Casio CTK6000 User Manual

Also see for CTK6000: User guide

Contents

Casio CTK6000 User Manual Manual pdf 44 page image

Using the MixerE-42The tables below show the parameters that can be configured on the mixer screen.The settings marked with an asterisk (*) in the “Setting Range” column are initial defaults.MASTER parameters include items for adjusting the volume level, pan position, and other settings that are applied globally to allparts.DSP parameters include DSP-related settings that are applied globally to all parts.• DSP parameter setting cannot be changed while “on” is selected for the “DSP Disable” effect setting. See “To add thechorus effect to sounds” (page E-35) for information about “DSP Disable”. If you want to change DSP parametersettings, change the “DSP Disable” setting to “oFF”.Mixer Parameter SettingsMASTER ParametersParameter Name Description Setting RangeVolume(Master Volume)Specifies the maximum volume level of Digital Keyboard output.The level set here is the maximum level that can be set with the L-2 (MAINVOLUME) knob.0 to 127*Pan(Master Pan)Specifies the stereo pan position of all sound output by the Digital Keyboard.0 indicates the center, while a smaller values shifts to the left and a larger valueshifts to the right.–64 to 0* to +63DSP ParametersParameter Name Description Setting RangeCho/DSP(Chorus/DSP)Specifies whether the Digital Keyboard’s sound source should go throughthe chorus or DSP.*1 This setting item is linked to the “Chorus/DSP”*2 itemon the effect setting screen. The settings below cannot be configuredwhenever this parameter is “Chorus”.Chorus*, DSPPart(DSP Output Enable)Specifies if a note should be output (on) or not output (oFF) after it passesthrough the DSP.oFF, on*Volume(DSP Output Volume)Specifies the post-DSP volume level.*1 0 to 127*Pan(DSP Output Pan)Specifies the post-DSP send stereo pan position. 0 indicates the center,while a smaller values shifts to the left and a larger value shifts to the right.–64 to 0* to +63Rev.Send(DSP Output Reverb Send)Specifies how much reverb is applied to the post-DSP send note. 0 to 40* to 127*1 See the block diagram under “Configuration of Effects” (page E-32).*2 See “To add the chorus effect to sounds” (page E-35) and “To use a DSP” (page E-36).