E-13Selecting and Playing a Tone1. Rotate the L-2 (MAIN VOLUME) knob towardsMIN to set the volume to a low level.2. Referring to “Connections” (page E-11),connect headphones, amplifier, or other device.3. Use the L-1 (POWER) button to turn on power.• The Digital Keyboard display screen will appear asshown below, which indicates that it is ready to playwith a piano tone (using initial power on defaultsettings).• To turn off the Digital Keyboard, press the L-1(POWER) button again.• Under its initial configuration, the Digital Keyboard willreturn to its default settings whenever you turn it off.You can change the initial configuration to have theDigital Keyboard remember its latest setup or to applya predetermined setup each time you turn it on. Fordetails, see “AutoResume (Auto Resume)” (pageE-100) and “Default (Default Settings)” (page E-100).• The message “Please Wait” will remain on the displaywhile a data save operation is in progress. Do notperform any other operation while it is displayed.Turning off the Digital Keyboard or removing thememory card can cause Digital Keyboard data to bedeleted or become corrupted. It also can cause theDigital Keyboard to fail to turn on when the L-1(POWER) button is pressed. If this happens, refer to“Troubleshooting” (page E-114).This Digital Keyboard is designed to turn off automatically toavoid wasting power after no operation is performed for apreset amount of time. The Auto Power Off trigger time is sixminutes under battery power and four hours under ACadaptor power.• Auto Power Off is enabled while “on” is selected for“AutoPower (Auto Power Off)” (page E-99). The initialdefault setting is “on”. To disable Auto Power Off, select“oFF” for “AutoPower” (Auto Power Off).• You also can use the procedure below to temporarilysuspend Auto Power Off while it is enabled.L-1L-1 L-4L-4 R-1 R-12R-1 R-12L-17L-17L-18L-18L-2L-2R-19R-19R-14R-14R-20R-20L-14L-14L-15L-15R-1 - R-12To turn on Digital Keyboard powerAuto Power Off