E-43SmartMedia Card Error MessagesDisplay Message Cause ActionEr Card R/WEr No CardEr FormatEr ProtectEr SizeOverEr WrongDatEr Not SMF0Er No FileThere is something wrong with the card.(1) The card is not set correctly in the card slot.(2) There is no card in the card slot or the cardwas removed part way through a cardoperation.(1) The format of the card is not compatiblewith this keyboard.(2) The card is damaged.The card is write protected.The SMF you are trying to read is too large.The SMF data is corrupted or the wrongformat.You are attempting to play SMF data that isnot Format 0.You are trying to read data from a card thatdoes not contain any SMF data that issupported by this keyboard.Use a different card.(1) Remove the card and reinsert it correctly(page E-41).(2) Insert a card into the card slot. Neverremove a card from the card slot while acard access operation is in progress.(1) Change to a card that has the proper format.................................................................. E-41(2) Use a different card.• Use a different card.• Remove the card’s write protect sticker toenable data storage. .............................. E-40Press the CARD button to return to the SMFdata selection screen, and then select differentSMF data that is smaller than the file you aretrying to read (page E-42).Use different data.Use only Format 0 SMF data.Load a card that contains SMF data that issupported by this keyboard.Using a SmartMedia Card653A-E-045ALK70S_e_32-44.p65 04.8.18, 11:04 AM43