EnglishUsing Built-in TonesE-15You can use the Duet Mode to split the Digital Piano’skeyboard in the center so two people can play a duet.This makes it possible to configure the keyboard so, forexample, the teacher can play on the left and thestudent can follow along on the right. Or one personcan play the left hand part on the left, while anotherplays the right hand part on the right.Pedal Operation when Playing a Duetz Optional SP-33 Pedal Unitz Supplied SP-3 Pedal UnitTo use the SP-3 Pedal Unit as the right keyboarddamper pedal, connect it to the em (DAMPER PEDAL)terminal.• Half-pedal operation is not supported in this case.To use the SP-3 Pedal Unit as the left keyboard (initialdefault setting) or right keyboard damper pedal(selectable), connect it to the em (SOFT/SOSTENUTOPEDAL) terminal.• For information about how to select left or rightkeyboard control with the SP-3 Pedal Unit, see“Soft/Sostenuto Pedal Jack Setting” (page E-46).Configuring the Digital Piano for DuetPlay1. Press the bn (USER SONGS) button so itslower lamp is lit.2. While holding down the cs (FUNCTION)button, press the dq (SPLIT) button.This causes the Duet Mode on/off screen to appear.• The keyboard keys are disabled while this screen isdisplayed.3. Press the ct (q) button to turn on the DuetMode.This will cause the dq (SPLIT) button lamp to flash.4. Press the cs (FUNCTION) button.This exits the Duet mode on/off screen and configuresthe Digital Piano’s keyboard for duet play.5. To turn off the Duet Mode, press the dq(SPLIT) button so the SPLIT lamp goes out.NOTE• You also can use the procedure under “Duet Mode”(page E-44) to turn the Duet Mode on or off.Playing a DuetC3 C4 C5 C6 C3 C4 C5 C6Right keyboardLeft keyboard(Middle C) (Middle C)Left and right side damper pedalLeft keyboarddamper pedalRight side damper pedal(Half-pedal operationsupported)Lit