Casio PX-350M User Manual

Also see for Privia PX-350M: User manual User guide User guide User guide

Contents

Casio PX-350M User Manual Manual pdf 52 page image

E-50USB Flash Drive5. Use the ct (w, q) buttons to select the filenumber (01 to 99) you want to assign to thedata when it is saved to the USB flash drive.• The file number is the final two characters of the filename* that appears on the display. By changing thiswithin the range of 01 to 99 for each save, up to 99files of the same data type can be stored on the USBflash drive.* The first six characters of the file name indicate thedata type as shown below. These characters arefixed and cannot be changed.6. Press the dp (ENTER) button.• The message “Please Wait” will remain on thedisplay while the save operation is being performed.Do not perform any Digital Piano operation whilethis message is on the display. “Complete” appearson the display after data save is complete.• If there is already a file with the same name on theUSB flash drive, a message “Replace?” will appearasking if you want to overwrite it with the new data.Press the ct (YES) button to overwrite or the ct (NO)button to cancel the save operation.■ USB Flash Drive Data (File) StorageLocationsThe above procedure stores Digital Piano data in a datafolder on the USB flash drive. The data folder wherethe data is stored depends on the data type.• The above data folders are created automaticallywhen you format the USB flash drive on the DigitalPiano (page E-49).• Note that a file not in one of the data folders cannotbe loaded, deleted, or renamed by the Digital Piano.You also will not be able to recall, delete, or play anyfile stored in any subfolder inside one of the datafolders.You can use the procedure below to load data from aUSB flash drive into Digital Piano memory.IMPORTANT!• Make sure that the data you want to load is in one ofthe data folders described under the procedure inthe preceding section of this manual. Note that if youput data into a music data play-only folder (such asthe PLAY folder), you will not be able to load the fileinto Digital Piano memory.1. Insert the USB flash drive into the DigitalPiano’s USB flash drive port.2. Select the data you want to load.* For more information about data types, see pageE-47.3. Hold down the ds (AUDIO RECORDER)button until the “LOAD” screen appears forthe data you selected.• You can cancel the LOAD/SAVE operation any timeby pressing the dm (EXIT) button.4. Use the ct (w, q) buttons to select the fileyou want.5. Press the dp (ENTER) button.• The message “Please Wait” will remain on thedisplay while the load operation is being performed.Do not perform any Digital Piano operation whilethis message is on the display. “Complete” appearson the display after data loading is complete.• If there already is a file with the same name in theDigital Piano memory, a message (Replace?) willappear asking if you want to replace it with the newdata. Press the ct (YES) button to overwrite or the ct(NO) button to cancel the load operation.Data Type File Name(** = file number)User rhythms USRRHY**User Music Preset USRMPS**Recorder songs RECSNG**Registrations REGIST**Data Type Data Folder NameUser rhythms RHYTHMACUser songs MUSICLIBUser music presets MUSICPSTSong recorder songs RECORDERRegistrations REGISTMRLoading Data from a USBFlash Drive to Digital PianoMemoryTo load thistype of data* Do this:User rhythms Select from among user rhythms 001through 010 (page E-21).User songs Select from among user songs 001through 010 (page E-25).User MusicPresetSelect from among user Music Presets001 through 050 (page E-29).Recorder songs Select from among recorder songs 1through 5 (page E-35).Registrations Press the bn (RHYTHM) button so theRHYTHM lamp next to it is lit.