Casio SE-S3000 User Manual

Also see for SE-S3000: Service manual Quick start guide Service manual Quick start guide Dealer's manual

Contents

E-80Advanced programmings and registrationsProgramming functions of departments and PLUs in a lumpThere are two methods to set functions of departments or PLUs which are programming at once andprogramming individual functions.Programming department functions in a lumpThis method programs function of a department at one time.Step Operation1 Turn the Mode switch to PGM position and select [SystemSetting] then press F key.>▪▪▪▪▪>F2 Enter 3 and press o key to set the register in theprogramming mode.3o3 You can skip this step if you program in departments 01through 30. If you wish to program in departments 31through 60, press DEPTSHIFT/DEPT# key.DEPTSHIFT/DEPT#4 Referring following table, input 12- digit program code. BB▪▪▪▪▪BB[Program code (12 digits)]5 Press the department key you wish to program !For example, programming in dept. 26.6 Repeat steps 3 through 5 if you wish to program functionsin another departments.7 Press o key to complete the program. oExample:Programming department 31 as;• Normal item: D12 = 0.• D11 through D8 must be 0000.• US taxable status 1 (a = 1) and 2 (b = 2): D7 = 3 (1 + 2)• Allowing zero unit price (a = 1), not allowing negative unit price (b = 0), hash item (c = 4): D6 = 5 (1 + 0 +4).• D5 must always be 0.• Limiting minimum entry digit: 3 digits: D4 = 3.• As this example is for setting functions in a department, D3 should be 0.• Applying commission 1 (a = 1), not applying commission 2 (b = 0): D2 = 1 (1 + 0).• D1 must always be 0.Press 3o DEPTSHIFT/DEPT# 00000350301!o