20050401u To specify the number of significant digits (Sci)○ ○ ○ ○ ○Example To specify three significant digits2(Sci) dwPress the number key that correspondsto the number of significant digits youwant to specify (n= 0 to 9).Specifying 0 makes the number ofsignificant digits 10.u To specify the normal display (Norm 1/Norm 2)Press 3(Norm) to switch between Norm 1 and Norm 2.Norm 1: 10–2 (0.01)>|x|, |x| >1010Norm 2: 10–9 (0.000000001)>|x|, |x| >1010Ab/caaw (Norm 1)(Norm 2)u To specify the engineering notation display (Eng mode)Press 4(Eng) to switch between engineering notation and standard notation. Theindicator “/E” is on the display while engineering notation is in effect.You can use the following symbols to convert values to engineering notation, such as2,000 (= 2 × 103) → 2k.E (Exa) × 1018 m (milli) × 10–3P (Peta) × 1015 μ (micro) × 10–6T (Tera) × 1012 n (nano) × 10–9G (Giga) × 109 p (pico) × 10–12M (Mega) × 106 f (femto) × 10–15k (kilo) × 1032-3-2Specifying the Angle Unit and Display Format# Displayed values are rounded off to the numberof significant digits you specify.# The engineering symbol that makes themantissa a value from 1 to 1000 is automaticallyselected by the calculator when engineeringnotation is in effect.
